StoGuard Detail Components
StoGuard Detail Components are a set of fully compatible accessories designed for use with Sto fluid-applied membranes. They provide durable air and water-resistive barrier continuity at movement joints, substrate transitions, penetrations, transitions to roofing and below-grade air barriers, and rough openings. Sto Detail components are typically installed first, then overcoated with the fluid-applied membrane to provide extra protection in these critical areas.
Air & Water Resistive Barrier Categories
Resource Links
*Some exceptions apply when using StoGuard Fabric and/or StoGuard Mesh with Sto ExtraSeal Water-Resistive Air Barrier. Refer to specific product documents for more information.
StoGuard® Conformable Membrane
StoGuard Conformable Membrane is a self-adhered membrane featuring an aggressive no-primer adhesive and a facing membrane that provides 1470% elongation. Minimum installation temperature is 20°F. The high-elongation facer membrane readily conforms to complex shapes found on the building enclosure.
| APPLICATIONS: | Dynamic joints, sheathing joints and corners, flashings and rough opening protections, penetrations, static joints and seams |
StoGuard® Fabric
StoGuard® Fabric is a tough reinforcement designed to be saturated with Sto Gold Coat®, Sto AirSeal® or Sto VaporSeal® to produce a waterproof flexible flashing material and sheathing joint treatment.
| APPLICATIONS: | Sheathing joints and corners, flashing and rough opening protections, penetrations |
StoGuard® Transition Membrane
StoGuard® Transition Membrane is a nonwoven fabric designed to be saturated with Sto Gold Coat®, Sto AirSeal® or Sto VaporSeal® to create a flexible, waterproof, airtight composite material. Since it is embedded in wet StoGuard fluid-applied membrane, it can readily conform to complex shapes found on the building enclosure.
| APPLICATIONS: | Dynamic joints, static joints and seams |
