StoTherm ci MVES
Lightweight, energy-efficient Exterior Insulation and Finish System with a masonry veneer surface
Additional System Characteristics
Allowable Deflection: L/360 ci Material: Sto GPS Board, EPS Available ci R-value R5.0 - R19 (Sto GPS Board) or R3.6-R14 (Sto EPS) Typical wall thickness at minimum R-Value 2" - 4" (R5.0 or R3.6), depending on exterior veneer Typical wall thickness at maximum R-Value 5" - 7" (R19 or R14), depending on exterior veneer Construction Type I, II, III, IV, V Code Reports ICC ESR 1233, ICC ESR 1748 System NFPA 285 and Fire Resistance Compliance Max 4" Sto GPS Board or Sto EPS Approximate weight 11 - 21lbs / SF (depending on weight of exterior veneer) Service life, years >50 Sustainability Air and Moisture Barrier System StoGuard vapor permeable or impermeable system Defined drainage plane Yes Height Restrictions 72ft for tile and thin brick and 30ft for manufactured stone or thin natural stone Fortification Layer: Fireblocking Cost $$$
System Documents
System BulletinStoTherm ci MVES 5700SpecificationsStoTherm ci MVES DOC
StoTherm ci MVES PDFBrochuresSto TurboStick Brochure
StoSeal STPE Sealant
Sto Masonry Veneer Engineered Systems
Sto GPS Board
StoTherm ci SystemsDetailsStoTherm ci MVES 57s.xx Detail BookletCode & Test ReportsStoTherm ci MVES IBC-IECC SC-5700
NFPA 285 Wall System Compliance DirectoryBIM ObjectsStoTherm ci MVES - BIM Object